Pleiadian Laboratories presents: DeeperSpace HUD v1.1
is the logical evolution of the original DeepSpace HUD, with some enhancements and refinements. Having been some weeks in testing, it has been deemed stable enough for public consumption.
In version 1.1, the HUD has now added a Current Location display, immediately telling you about some of the key aspects of the solar system you're in, as well as navigation info such as the nearest object, and most importantly, the Current Risk notifier. The risk tells you how dangerous the current situation around you is, at this moment. Information is updated, as it happens.
Additionally, if you have the Advanced Navigational Array
installed, you will get immediate info on your current set destination, what the next system on your route is (depending on the mode you set), and how much this next jump will take.
To round it off, the crosshairs have been slightly optimized.
As a little gimmick, the speed meter will either show your current speed, or indicate whether or not you are in Torus Drive. If Torus is enabled, you will get to see the actual Torus Speed below the speed meter.
Here's a live screenshot of version 1.1:
Get version 1.1 from here:
ORIGINAL RELEASE BULLETIN:
To provide you with its final look and functionality, please take a look at the attached in-cockpit photo, taken by Commander Pleiadian himself during final test flight before release.
Please note that the HUD of the cockpit will adjust itself depending on the current situation - this means that the content is dynamic.
In Yellow Alert, Mass-Lock:
The Status Display informs you about you being in a Mass-Lock radius.
In Red Alert:
The Status Display switches to show the amount of energy currently in the Fore and Aft shields, and provides you with corresponding icons.
In Green Alert:
Now the Status Display switches again and shows the current set Hyperspace/Witchspace destination.
Here you can see the screenshot of above again with its MFDs, without the markers.
Get DeeperSpace v1.01 from here: