Page 3 of 5

Re: [Release] Coluber HUD No. 1

Posted: Thu Sep 25, 2014 6:35 pm
by Captain Beatnik
ffutures wrote:Could this have something to do with one of the other OXPs, Auto Crosshairs 1.0.4.oxp?
Possibly there is a conflict with one of the other OXPs but I can not verify this. Have you checked the logs? Maybe you can find a hint there. I´m not good at scripting, so if there is a problem with a script form one of the other OXPs, I can not help you in any way.

As I already have said Coluber HUD CH01 is not a scripted HUD, so I guess a conflict with one of the other OXPs is not likely. The only script included in the OXP is the world script to change the name of hud.plist to make it compatible with HUDSelector.

The testversion I have uploaded for you has the keys for non linear scanner and ultrazoom added directly to hud.plist. You do not need a script to add that keys afterwards if you use the testversion.

I have also set up the key for the joystickindicator in the testversion (this key was commented out in the released version) but I can not verify if it works because I do not have a joystick.

Re: [Release] Coluber HUD No. 1

Posted: Thu Sep 25, 2014 7:33 pm
by ffutures
I've just tried this and it's working fine, no problems at all. Many thanks!

Re: [Release] Coluber HUD No. 1

Posted: Thu Sep 25, 2014 10:12 pm
by Redspear
Captain Beatnik wrote:
Redspear wrote: Does the crosshair always extend to the screen edges?
Yes, this is intended. If you want shorter guidelines, the length can easily be adjusted. You only have to change four values in the "Guidelines" section of each crosshair. E.g. Changing

Code: Select all

//Guidelines
		(0.30,   0.000,   9.000,	0.30,  0.000,  1.300),
		(0.30,   0.000,  -5.000,	0.30,  0.000, -0.100),
		(0.30,  13.200,   0.000,	0.30,  0.100,  0.000),
		(0.30, -13.200,   0.000,	0.30, -0.100,  0.000),
to

Code: Select all

//Guidelines
		(0.30,   0.000,   1.800,	0.30  0.000,  1.300),
		(0.30,   0.000,  -1.800,	0.30,  0.000, -0.100),
		(0.30,  1.800,   0.000,	0.30,  0.100,  0.000),
		(0.30, -1.800,   0.000,	0.30, -0.100,  0.000),
will cause the guidelines to start just outside the outer 16-sided-figure.
Belated thanks for this, I'll be giving it a try.

Thanks :D

Re: [Release] Coluber HUD No. 1

Posted: Fri Sep 26, 2014 12:58 pm
by Bogatyr
Really like this HUD, thanks!

Re: [Release] Coluber HUD No. 1

Posted: Fri Sep 26, 2014 1:52 pm
by ffutures
Works well in portrait mode too, though as usual the scanner is a little on the small side

Image

Re: [Release] Coluber HUD No. 1

Posted: Mon Sep 29, 2014 6:53 pm
by Wildeblood
ffutures wrote:Could this [problem] have something to do with one of the other OXPs, Auto Crosshairs 1.0.4.oxp?
The discussion above motivated me to update Auto Crosshairs OXP and add it to the download manager.

Then I made a modified version of this HUD's cross-hairs to use with it, where the 16 short line segments connecting the inner and outer 16-sided rings are highlighted when the target is centred. Captain Beatnik, would you be interested in including this in a future update of Coluber HUD No. 1?

If anyone wants to try it, just download this and put it into your AddOns folder; there's no need to modify either the Coluber HUD or Auto Crosshairs OXPs.

http://wiki.alioth.net/img_auth.php/f/f ... ch.oxp.oxz

Example of pulse laser off target and on target:-

Image

Image

Re: [Release] Coluber HUD No. 1

Posted: Wed Oct 01, 2014 6:26 pm
by SARR
Great Hud,

really improves the feel of the game. Just a question. I got 2 MFD and only one ist sticky. I have to switch the second one on eacht time I leave a station. Is there a way to make the second MFD sticky too?

Greez Sarr

Re: [Release] Coluber HUD No. 1

Posted: Wed Oct 01, 2014 7:02 pm
by Captain Beatnik
Wildeblood wrote: ... I made a modified version of this HUD's cross-hairs to use with it, where the 16 short line segments connecting the inner and outer 16-sided rings are highlighted when the target is centred. Captain Beatnik, would you be interested in including this in a future update of Coluber HUD No. 1?
I like the function, very useful! I will add it in the next update of coluber HUD No. 1 if you agree.

Re: [Release] Coluber HUD No. 1

Posted: Wed Oct 01, 2014 7:56 pm
by Captain Beatnik
SARR wrote:Great Hud,

really improves the feel of the game. Just a question. I got 2 MFD and only one ist sticky. I have to switch the second one on eacht time I leave a station. Is there a way to make the second MFD sticky too?

Greez Sarr
Hi Sarr,

unfortunately I could not reproduce the behavior you describe. :(

As a test, I have activated all seven MFD´s Coluber HUD allowes, and they all stayed switched on as expected after docking and leaving the station again. I guess the cause for the behavior may be one of MFD-OXP´s. As a quick test, I suggest you install only CommLog, Manifest and Navigation-MFD and see If the second MDF still is switched off after you leave the station. The three worked fine in my test. If this works on your system too, add the other MFD´s you want to have one by one and see which one causes the behavior. I hope this helps to find out where the problem is located.

Best regards

C.B.

Re: [Release] Coluber HUD No. 1

Posted: Wed Oct 01, 2014 9:48 pm
by Norby
SARR wrote:Is there a way to make the second MFD sticky too?
[EliteWiki] HUD Selector can save your MFD settings into your savegame. In Oolite v1.80 you must preset your MFDs in Interfaces (F4) within HUD and MFD selector, in v1.81 your changes during flight will be saved also.

Re: [Release] Coluber HUD No. 1

Posted: Thu Oct 02, 2014 4:59 am
by Wildeblood
Captain Beatnik wrote:
Wildeblood wrote: ... I made a modified version of this HUD's cross-hairs to use with Auto Crosshairs...
I like the function, very useful! I will add it in the next update of coluber HUD No. 1 if you agree.
Yes, please. I've posted information about how to create such a customization in the Auto Crosshairs thread, in case it is not obvious.

Re: [Release] Coluber HUD No. 1

Posted: Thu Oct 02, 2014 6:01 am
by SARR
Captain Beatnik wrote:
SARR wrote:Great Hud,

really improves the feel of the game. Just a question. I got 2 MFD and only one ist sticky. I have to switch the second one on eacht time I leave a station. Is there a way to make the second MFD sticky too?

Greez Sarr
Hi Sarr,

unfortunately I could not reproduce the behavior you describe. :(

As a test, I have activated all seven MFD´s Coluber HUD allowes, and they all stayed switched on as expected after docking and leaving the station again. I guess the cause for the behavior may be one of MFD-OXP´s. As a quick test, I suggest you install only CommLog, Manifest and Navigation-MFD and see If the second MDF still is switched off after you leave the station. The three worked fine in my test. If this works on your system too, add the other MFD´s you want to have one by one and see which one causes the behavior. I hope this helps to find out where the problem is located.

Best regards

C.B.
Thanks, i´ll give it a try as soon as a´m home again.

Greez Sarr

Re: [Release] Coluber HUD No. 1

Posted: Wed Oct 08, 2014 12:33 am
by ffutures
One minor thing - today I loaded an old saved game - my last run with an Anaconda, which goes back to Oolite 1.77 - and wanted to give the ship a name, The text that's entered is hidden by the indicators etc. on the left hand side.

Re: [Release] Coluber HUD No. 1

Posted: Sun Nov 23, 2014 9:24 pm
by ffutures
Possibly a stupid question...

Why does the status "green" light flash? I can understand yellow or red flashing to draw attention to immanent doom etc., but to my way of thinking green should be the "everything calm, no need for a flashing light" state.

Re: [Release] Coluber HUD No. 1

Posted: Mon Nov 24, 2014 1:09 am
by CheeseRedux
ffutures wrote:Why does the status "green" light flash? I can understand yellow or red flashing to draw attention to immanent doom etc., but to my way of thinking green should be the "everything calm, no need for a flashing light" state.
It's the same light, the different colours are achieved by using filters.
If you wanted a non-flashing light, you'd have to change the bulb